Screwdriver with Torx 10 drive
Screwdriver with Torx 10 drive

Screwdriver with Torx 10 drive

Regular price €4,30
Sale price €4,30 Regular price
Unit price
Tax included.
Screwdriver with Torx 10 drive

Screwdriver with Torx 10 drive

Regular price €4,30
Sale price €4,30 Regular price
Unit price
Description
Shipping information

To assemble the Bigfoot you will need a cordless drill or a screwdriver with a Torx 10 drive.

If you don't have either of these in your toolbox, we strongly recommend purchasing the Tiltstop screwdriver or bit so you can attach your Bigfoots using the screws included in the set.

More Bigfoot

Bigfoot Accesories
BIGFOOT Single Pack

BIGFOOT Single Pack

from 
Regular price €12,40
Sale price €12,40 Regular price
Unit price
Improve your picture hanging with the Bigfoot – so that pictures finally lie parallel on...
Buy 6, pay 5
BIGFOOT Six Pack

BIGFOOT Six Pack

from 
Regular price €62,00
Sale price €62,00 Regular price
Unit price
Six Pack Your price advantage: Buy 6, pay for 5. Each Bigfoot size is available...
20% discount
BIGFOOT Starter Kit

BIGFOOT Starter Kit

from 
Regular price €52,00
Sale price €52,00 Regular price
Unit price
Starter Kit Small (1xXXS, 1xXS, 1xS, 1xM, 1xL), your price advantage: 20% discount Large (2xXXS,...
Torx drive bit 10

Torx drive bit 10

Regular price €1,50
Sale price €1,50 Regular price
Unit price
To assemble the Bigfoot you will need a cordless drill or a screwdriver with a...
Screwdriver with Torx 10 drive

Screwdriver with Torx 10 drive

Regular price €4,30
Sale price €4,30 Regular price
Unit price
To assemble the Bigfoot you will need a cordless drill or a screwdriver with a...
Countersunk screws 3x25 - bulk pack of 20 pieces

Countersunk screws 3x25 - bulk pack of 20 pieces

Regular price €1,60
Sale price €1,60 Regular price
Unit price
20 chipboard screws 3x25 with countersunk head, TX10 drive, galvanized All Bigfoot sets (Single Pack,...
Countersunk screws 3x12 - bulk pack of 20 pieces

Countersunk screws 3x12 - bulk pack of 20 pieces

Regular price €1,40
Sale price €1,40 Regular price
Unit price
20x chipboard screws 3x12 with countersunk flat head, TX10 drive, galvanized To mount the Bigfoot...

Bigfoot Size Advisor

Find the correct Bigfoot size in 3 easy steps.

mm
10150
2) Weight: paint build-up / support

Rather light/normal: e.g. normal paint application with oil, acrylics, watercolour, gouache, pastels, pourings, few material layers (the artwork is relatively light for its size).

Rather heavy: e.g. very thick paint layers, mixed media, stone powders, rust effects, bitumen, mortar, cement, plaster, lots of texture paste, lots of resin, glazed/framed works, on wood etc. (the artwork is relatively heavy for its size).

If in doubt, choose “rather light/normal”.

3) Rope length

Rather short: the rope above the artwork is shorter than the height of the artwork.

Rather long: the rope above the artwork is longer than the height of the artwork.

No result yet

Enter the artwork depth on the left or use the slider.

Show notes
Suitable for the following artwork depths (mm):
  • - XXS: 15–30
  • - XS: 25–40
  • - S: 40–60
  • - M: 55–75
  • - L: 65–95
  • - XL: 80–115
  • - XXL: 100–135
If in doubt, choose the smaller size.

Note on rope length: Comparison: long rope vs. short rope